The Best 60 40 Solder – 2022

After hours of researching and comparing all models on the market, we find out the Best 60 40 Solder of 2022. Check our ranking below.

Our Picks For The Top 60 40 Solder


Bestseller No. 1
Canfield 60/40 solder for stained glass
  • Made in the USA 1Lb Spool using only Virgin Material
  • 60/40 is 60% Tin and 40% Lead
  • For Use on Copper Foil Seams and Lead Seams
  • Melting Temperature of 360° - 376°F
Bestseller No. 2
AUSTOR 60-40 Tin Lead Rosin Core Solder Wire for Electrical Soldering (100g, 0.8mm)
  • Sn/ Pb: 60% / 40%; Flux: 2.0%; flows well and heats evenly
  • Diameter: 0.8 mm (0.032 in); weight of solder wire: 100g (0.22 lb)
  • Melting point range: 185°C - 190°C (365°F - 374°F)
  • Good solder ability both in electrical conductivity and thermal conductivity
  • Easy to use, be widely applied in electrical repairs(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website)
Bestseller No. 3
SONEAK 60/40 Tin Lead Solder With Rosin Core For Electrical Soldering 1.0mm 100g
  • ★ Tin Lead Solder Wire: High quality Rosin Core Solder Wire
  • ★ Sn60-Pb40 Solder: Sn 60%- Pb 40%, Flux 2.0%; Diameter:1.0mm/0.039inch
  • ★ Lower Melting Point: 361F/183C, easy to be soldered, flows smoothly, soldering fast and strong shiny soldering point
  • ★ Special Features: This SONEAK 1.0mm solder wire offers lower temperature melting, pretty good flow,clean, less smoke, reliable and nice soldering joint
  • ★ Applications: Very good soldering capability for electrical soldering, esp DIY project, Home improvement, Maintenance of sterro, toys, TV circuit boards etc. Repairing.(Warning: This product can expose you to lead which is know to the State of Califormia to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings website)
Bestseller No. 4
WYCTIN 60-40 Tin Lead Rosin Core Solder Wire for Electrical Soldering and DIY 0.0236 inches(0.6mm) 0.11lbs
  • ★ Fine Rosin Core Solder.
  • ★ Lower Melting Point: 361F/183C.
  • ★ Wire Dia: 0.6mm(0.0236inches), Gross Weight: 50gram/0.11lbs/1.61Ounces.
  • ★ Application: DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other small home electrical appliance etc.
Bestseller No. 5
YI LIN 60/40 Solder 100g Tin Lead Rosin Core Solder Wire For Electrical Soldering (0.6mm/100g)
  • 【PACKAGE INCLUDE】 Tin Lead Solder Wire: High quality Rosin Core Solder Wire
  • 【PARAMETERS】 The Tin Lead Solder Wire:Tin 60%-Lead 40%(Sn60-Pb40); Gross weight:100g/-.22lbs;Flux Content:1.8%;Diameter:0.8mm
  • 【SPECIAL FEATURES】 Antioxidation, Low melting point,Fast Welding, Beautiful welding point, Less residue
  • 【APPLICATIONS】Very good soldering capability for welding electronic componet.Repairation of cable,TV,radio.stereos;Circuit board;DIY;Home improvement and household appliances etc.
  • 【WARNING】This product can expose you to lead, which is known to the California to cause brith defects or other reproductive harm.For more information go to the offical Proposition 65 Warnings Website: www.P65Warnings.ca.gov
Bestseller No. 7
Alpha Fry AT-31604 60-40 Rosin Core Solder (4 Ounces)
  • Fine electrical soldering
  • 60-Percent tin and 40-percent lead
  • 376 Degree F melting point
  • 0.062 Diameter. 4-Ounce
  • Made in Mexico
Bestseller No. 8
2 Packs 60-40 Tin Rosin Core Solder Wire for Electrical Soldering, Stained Glass, Home DIY, 2 mm, 500 g
  • Parameters Information: the tin lead solder wire: tin 60 percent - lead 40 percent, Sn60-Pb40; Electrical soldering wire diameter is 2.0 mm, gross weight 500 gram/ 1.1lbs, good size for pocket
  • Quality Material: the solder wire is electrolyzed from purity tin ingots, with good electrical properties and effective antioxidant, and there is less smoke and no pungent odor while dissolving, causing less pollution after welding, which will bring less harmful to the environment, you can use it safely and securely
  • Easy to Use: this solder wire has good soldering ability, easy to be soldered, flows smoothly and bonds well, solder fast and strong melting point, and it can be dissolved relatively cleanly and has less residue
  • Wide Application: this solder wire feature good soldering capability and can be applied for welding electronic component, circuit boards, audio products, electronic security products, stained glass DIY, TV radios and, small tech DIY or general solder with crafts, home improvement, household appliances and so on
  • Package Content: you will get 2 packs purity low temperature solder wire, enough amount to meet your daily use needs
SaleBestseller No. 9
KESTER SOLDER 24-6040-0027 Wire Solder, 0.031"Dia., Pack of (1),32117
  • Kester 24-6040-0027 - (1) Spool, 1 Pound per Spool
  • Diameter: 0.031" Inch (0.80mm)
  • Alloy: 60% Tin / 40% Lead (Product contains Halogen)
  • Core / Flux Type: Rosin Core / 44 Flux (3.3%)
  • Authentic Kester Product - Made in the U.S.A.
Bestseller No. 10
Rosin Core Solder Wire with 60-40 Tin Lead for Electrical, Electronic, PCB Soldering; By Mandala Crafts; 50g 0.5mm
  • Soldering wire with 2% rosin core made from 60% tin and 40% lead; Fast melting and maximum wetting spread; No spattering and corrosion; Heat fatigue and oxidation resistant; Melt clean and flow smooth; Less slag and smoke;
  • Solder wire or estaño para soldar for electronic, electrical, printed circuit board, rc car, guitar, Led strip, drone, or jewelry soldering, wire splicing, stained glass, and DIY hobby applications
  • Easy to work with; Prefluxed built-in rosin core; No rosin flux application mess; Good electrical & thermal conductivity; Compatible with most soldering irons and equipment;
  • Low melting temperature point: 376 Degrees F; Shorter soldering time; Weight 50g; Approximate length: 0.6mm, 25M; 0.8mm, 14M; 1mm,9M; 1.5mm, 4M; Continuous length and consistent gauge and core;
  • California Prop 65 Warning: The wires of this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.


How Do You Buy The Best 60 40 Solder?


Do you get stressed out thinking about shopping for a great 60 40 Solder? Do doubts keep creeping into your mind? We understand because we’ve already gone through the whole process of researching 60 40 Solder, which is why we have assembled a comprehensive list of the greatest 60 40 Solder available in the current market. We’ve also come up with a list of questions that you probably have yourself.


We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 60 40 Solder that you consider buying. Your questions might include the following:

  • Is it worth buying an 60 40 Solder?
  • What benefits are there with buying an 60 40 Solder?
  • What factors deserve consideration when shopping for an effective 60 40 Solder?
  • Why is it crucial to invest in any 60 40 Solder, much less the best one?
  • Which 60 40 Solder are good in the current market?
  • Where can you find information like this about 60 40 Solder?

We’re convinced that you likely have far more questions than just these regarding 60 40 Solder, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.


Potential sources can include buying guides for 60 40 Solder, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best possible 60 40 Solder. Make sure that you are only using trustworthy and credible websites and sources.


We provide an 60 40 Solder buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 60 40 Solder currently available on the market.


This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:


  1. Brand Value: Every brand of 60 40 Solder has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 60 40 Solder?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: his simply is how much bang for the buck you get from your 60 40 Solder.
  5. Customer Ratings: Number ratings grade 60 40 Solder objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 60 40 Solder.
  7. Product Quality: You don’t always get what you pay for with an 60 40 Solder, sometimes less, and sometimes more.
  8. Product Reliability: ow sturdy and durable an 60 40 Solder is should be an indication of how long it will work out for you. .

We always remember that maintaining 60 40 Solder information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.


If you think that anything we present here regarding 60 40 Solder is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here . Or You can read more about us to see our vision.

Leave a Reply

Your email address will not be published.